For Interior Doors / Bathroom Stall Doors
STEP 1:
Identify The Mounting Location
- Determine the Side: The Door Nub should be placed on the door on the opposite side of the direction it swings.
- Choose Height: Make sure the placement is at a height that is convenient for use.
- Edge Distance: If you have short arms or limited mobility we recommend the placement to be close to the edge of the door. Users with longer arms can place it near the center.
STEP 2:
Prepare And Attach
- Clean the Surface: Thoroughly clean the area on the door where you plan to attach the Door Nub. Use a mild soap and water solution or an alcohol wipe to remove any dust, grease, or dirt. Allow the surface to dry completely before proceeding.
- Peel the Adhesive Backing: Carefully peel off the protective backing from the adhesive strip on the back of the Door Nub.
- Apply the Door Nub: Press the Door Nub firmly onto the door in the desired location. Hold it in place for about 30 seconds to ensure a strong bond.
STEP 3:
Press On And Set
- Firmly Press: Press and smooth the Door Nub onto the door, ensuring that you apply even pressure across the entire surface to secure a strong bond.
- Let It Set: Allow the adhesive to set for at least 24 hours before using the Door Nub to ensure it is securely attached.
For Exterior Doors / Screw-On
STEP 1:
Identify The Mounting Location
- Determine the Side: The Door Nub should be placed on the door on the opposite side of the direction it swings.
- Choose Height: Make sure the placement is at a height that is convenient for use.
- Edge Distance: If you have short arms or limited mobility we recommend the placement to be close to the edge of the door. Users with longer arms can place it near the center.
STEP 2:
Attach The Door Nub
- Place: Hold the Door Nub firmly against the door.
- Long Screw: Put the long screw through the back hole and screw into door.
- Short Screw: Put the short screw through the front hole and screw into door..